Røde S1 Vocal Microphone Condenser

The Røde S1 is a professional quality microphone, specifically designed for live vocal performance.
The S1 employs a true condenser transducer for optimal sound reproduction. The frequency response is
tailored to ensure clear vocals while reducing handling noise. The unidirectional (super cardioid) pick up
pattern limits background noise and reduces the susceptibility to feedback.
The five piece mesh head provides filtering of breath, wind, and plosive noise whilst not interfering with
the S1’s sensitivity or frequency response.
The hardened mesh head also protects the precision condenser transducer from air borne contaminants
and possible impact during performance and transit. The ergonomic design of the S1 also makes it
extremely comfortable to hold and control during performance.
The S1 requires P48V phantom supply and will work with most professional mixing consoles that
incorporate this standard. The high level output of the S1 is electronically balanced to reduce loss over
long cable runs with the additional benefit of high level rejection of electromagnetic interference.

 Studio recording quality.
 Rugged all metal construction.
 Attractive satin-nickel finish.
 Heat treated high strength mesh head.
 Custom designed integral ‘plosive’ screen.
 Ergonomically weighted & balanced.
 Low noise circuitry.
 Low handling noise.
 Complete with stand mount & zip pouch.
 Designed & manufactured in Australia.
 Full 5 year guarantee.

Acoustic principle: Externally polarized condenser, pressure
gradient transducer.
Directional pattern: Supercardioid.
Frequency range: 20 Hz ~ 20 000 Hz
Output impedance: 50 §Ù
Signal/Noise ratio DIN/IEC 651: 75 dB (1kHz rel 1 Pa; per IEC651, IEC268-15)
Equivalent noise: 18 dBA SPL (per IEC651, IEC268-15)
Maximum SPL: 151 dB (@ 0.7% THD into 1k§Ù)
Sensitivity at 1 khz into 1 k§Ù: -46.5 dB re 1 Volt/Pascal (4.7 mV @ 94 dB SPL) +/- 2 dB into 1k§Ù
Maximum output voltage: +12.5 dBu (@ 0.7% THD into 1k§Ù)
Dynamic range of the mic. amplifier DIN/IEC 651: 132 dB (per IEC651, IEC268-15)
Power (Supply voltage): Phantom supply voltage – 44V to 52V
Current consumption: 4.4 mA
Connector: XLR 3F