EuroCaster DS6000 FM Transmitter 6KW, stereo

[tabs style=”style1″]
[tab title=”IN DETAILS”]

EuroCaster DS6000 FM Stereo Transmitter is the best choice of all!

Compact 4U – 6 kW FM transmitter from EuroCaster.

Transmitter with IP remote control included. This quality transmitter has a lot of features you wont find on any other FM transmitters. For low power consumption during night time you can program the TX power to lower during a certain periode, and much more…

Main Features of the EuroCaster DS6000:

• Highest efficiency
• Nominal RF power 6000W
• Very low signal noise typ. -80 dB
• High stereo performance typ. 60 dB
• Extremely low distortion 0,01%
• Completely broadband
• 6th LD-MOS generation VSWR 65:1
• Large LCD color display with touch panel
• AC mains 90-260 VAC extend range with PFC
• CCIR & FCC compliant
• Remote Control through mobile APP
• Web server

OPTIONS
• AES/EBU
• RDS/RBDS coder
• SNMP remote control
• OIRT and JPN version
• Audio IP
• Digital device

General
Power Output:6000W, adjustable from front panel.
RF Output Impedance: 50 ohm.
RF Output Connector: “7/8″.
Monitor RF: BNC connector.
VSWR: 1,5:1
Frequency Range: 87.5 ÷ 108.00 MHz, only for analog on request
66 ÷ 74 MHz ( OIRT), 76 ÷ 90 MHz (JPN) Programmable in 10 kHz steps.
Frequency Stability: ±1 ppm from -5 to 45°C.
External Reference: 10 MHz SMA connector back panel.
Type of Modulation: DS series analog synthesis, Option full digital
synthesis.
Off Lock Attenuation: = -80 dBc.
Modulation Capability: ±150 KHz.
Limiter built in
Power Good Detector: adjustable from20÷90% of the power.
Audio Presence Detector: adjustable time from front panel.
External AGC: Automatic, with fine ADJ from front panel.
Modulation Mode: Mono, Stereo, Multiplex, SCA, RDS, Aux.
Preemphasis: Flat/50/75µs selectable from front panel.
Asynchronous AM S/N Ratio: -70 dB.
Synchronous AM S/N Ratio: -65 dB .
RF Harmonics: Exceeds EBU/CCIR/FCC requirements.
RF Spurious: Exceeds EBU/CCIR/FCC requirements.
[/tab]
[tab title=”FURTHER DETAILS”]

MONAURAL OPERATION
Audio Input Impedance: 600 ohm – =10 Kohm balanced.
Audio Input Level: Digital -12 to +12 dBm, Analog -6 to +12 dBm
Input Connector: XLR female.
Audio Frequency Response: ±0.1 dB, 30 Hz to 15 KHz.
Total HarmonicDistortion + Noise: 0.01% @ 400 Hz.
Intermodulation Distortion: 0.01%, 1 KHz/1.3 KHz, 1:1 ratio.
Transient Intermodulation Distortion: 0.01% 2.96KHz square wave and
14 KHz sine wave.
Distortion: 0.01% 2.96KHz square wave and 14 KHz sine wave.
FM S/N Ratio: -80 dB rms detector,-75 dB below ±75 KHz deviation.

STEREO OPERATION
Audio Input Impedance: 600 ohm – =10 Kohm balanced.
Audio Input Level: Digital -12 to +12 dBm, Analog -6 to +12 dBm Input
Connector: XLR female.
Audio Frequency Response: ±0.1 dB, 30 Hz to 15 KHz.
Total Harmonic Distortion + Noise: 0.01% @ 400 Hz.
Intermodulation Distortion: 0.01%, 1 KHz/1.3 KHz, 1:1 ratio.
Transient Intermodulation Distortion: 0,01% 2.96KHz square wave and
14 KHz sine wave.
FM S/N Ratio: -80 dB rms detector, -75 dB below ±75 KHz deviation.
Stereo Separation: Digital 20 Hz ÷ 15 KHz = -60dB, Analog -45 dB@30Hz
= -60dB@ Freq = 100 Hz
Crosstalk attenuation: Digital Main to Sub -70 dB 30 Hz to 15 KHz,
Analog = 45 dB@15kHz.
38 KHz Suppression: = -85 dB.
Pilot Frequency: 19 KHz ± 1 Hz
Output Pilot: Digital 1 Vpp. BNC female, analog 2Vpp adjustable from
front panel
[/tab]

[tab title=”OVERVIEW”]

MULTIPLEX OPERATION
Composite Input Impedance: 2 Kohm unbalanced.
Composite Input Level: Digital -12 to +12 dBm, Analog -6 to +18 dBm
Input Connector: BNC female.
Composite Amplitude Response: ±0.1 dB, 30 Hz to 100 KHz.
Total Harmonic Distortion + Noise: 0.01% @ 400 Hz.
Intermodulation Distortion: 0.01%, 1 KHz/1.3 KHz, 1:1 ratio.
Transient Intermodulation Distortion: 0.01% 2.96KHz square wave and
14 KHz sine wave.
FM S/N Ratio: -80 dB rms detector, -75 dB below ±75 KHz deviation

AES/EBU OPERATION (optional for Analog)
Input Connector: XLR female, optical TOS-LINK.
Data Format: S/PDF,AES/EBU, IEC958, EIAJCP340/1201.
D/A Converter: 24 bit.
Sampling Frequency: from 32 to 96 KHz.

AUDIO IP (optional)
Lan: Audio IP and Web interface to control and configure
Transport protocol: RTP over UDP;
Protocols: RFE Codec: Alaw,OGG VORBIS, MP3, AAC
SHOUTCAST/ICECAST Codec : TX MP3, RX AAC, AAC+, MP3,
OGG(icecast 2.x)

SCA, RDS, AUX OPERATION
Input Impedance: = 2 Kohm.
Input Level: -6 to +12 dBm.
Frequency Response: ±0.1 dB, 50 KHz to 100 KHz.
Input Connector: BNC female.

AUXILIARY CONNECTIONS
RS485: DB9 connector back panel.
CAN BUS (optional): DB9 connector back pane
Telemetry Interface: connector DB25 back panel.
LAN: RJ45 connector back panel
MPX OUT: connector BNC back panel.
[/tab]
[/tabs]