[tabs style=”style1″]
[tab title=”IN DETAILS”]
EuroCaster DS3000 FM Stereo Transmitter is the best choice of all!
Transmitter with IP remote control included. This quality transmitter has a lot of features you wont find on any other FM transmitters. For low power consumption during night time you can program the TX power to lower during a certain periode, and much more…
Main Features of the Digital EuroCaster DS3000:
• Highest efficiency
• Nominal rf power 3000W
• Very low signal noise typ. -80 dB
• High stereo performance typ. 60 dB
• Extremely low distortion 0,01%
• Completely broadband
• 6th ld-mos generation VsWr 65:1
• large lCd color display with touch panel
• AC mains 90-260 VAC extend range with pfC
• CCir & fCC compliant
• remote Control through mobile App
• Web server
Features and specifications subject to change without notice
www.eurocaster.eu
OPtiOnS
• AEs/EBU
• rds/rBds coder
• sNmp remote control
• oirT and JpN version
• Audio ip
• digital device
GENERAL
Power Output 3000W adjustable from front panel
RF Output Impedance 50 ohm
RF Output Connector “7/8”
Monitor RF BNC connector
VSWR 1,5:1 WITH AUTOMATIC FOLDBACK
Frequency Range 87.5 ÷ 108.00 MHz, on request 66 ÷ 74 MHz ( OIRT) 76 ÷ 90 MHz (JPN) Programmable in 1 Hz steps
Frequency Stability ±1 ppm from -5 to 45°C
External Reference 10 MHz BNC connector back panel
Type of Modulation Analog
Off Lock Attenuation ≥ -80 dBc
Modulation Capability ±150 KHz
Limiter built in
Power Good Detector adjustable from 20÷90% of the power
Audio Presence Detector adjustable time from front panel
External AGC Automatic, with fine ADJ back panel
Modulation Mode Mono, Stereo, Multiplex, SCA, RDS, Aux
Preemphasis Flat/50/75μs selectable from front panel
Asynchronous AM S/N Ratio -70 dB
Synchronous AM S/N Ratio -65 dB
RF Harmonics Exceeds EBU/CCIR/FCC requirements
RF Spurious Exceeds EBU/CCIR/FCC requirements
[/tab]
[tab title=”FURTHER DETAILS”]
MONO OPERATION
Audio Input Impedance 600 ohm – 10 Kohm balanced
Audio Input Level -12 to +12 dBm
Input Connector XLR female
Audio Frequency Response ±0.1 dB, 20 Hz to15 KHz
Total Harmonic Distortion + Noise 0.01% @ 400 Hz
Intermodulation Distortion 0.01%, 1 KHz/1.3 KHz, 1:1 ratio
Transient Intermodulation Distortion 0.01% 2.96KHz square wave and 14 KHz sine wave
Distortion 0.01% 2.96KHz square wave and 14 KHz sine wave
FM S/N Ratio -80 dB below ±75 KHz dev.
STEREO OPERATION
Audio Input Impedance 600 ohm – 10 Kohm balanced
Audio Input Level -12 to +12 dBm
Input Connector XLR female
Audio Frequency Response ±0.1 dB, 20 Hz to 15 KHz
Total Harmonic Distortion + Noise 0.01% @ 400 Hz
Intermodulation Distortion 0.01%, 1 KHz/1.3 KHz, 1:1 ratio
Transient Intermodulation Distortion 0.01% 2.96KHz square wave and 14 KHz sine wave
FM S/N Ratio -80 dB below ±75 KHz dev.
Stereo Separation 20 Hz ÷ 15 KHz ≥ -60dB
Crosstalk attenuation Main to Sub -70 dB 30 Hz to 15 KHz
38 KHz Suppression ≥-85 dB
Pilot Frequency 19 KHz ± 1 Hz
Output Pilot 1 Vpp., BNC female
[/tab]
[tab title=”OVERVIEW”]
TECHNICAL SPECIFICATIONS
MULTIPLEX OPERATION
Composite Input Impedance 2 Kohm unbalanced
Composite Input Level -12 to +12 dBm
Input Connector BNC female
Composite Amplitude Response ±0.1 dB, 30 Hz to 100 KHz
Total Harmonic Distortion + Noise 0.01% @ 400 Hz
Intermodulation Distortion 0.01%, 1 KHz/1.3 KHz, 1:1 ratio
Transient Intermodulation Distortion 0.01% 2.96KHz square wave and 14 KHz sine wave
FM S/N Ratio -80 dB below ±75 KHz deviation
AES/EBU OPERATION
Input Connector XLR female, optical TOS-LINK
Input Impedance 110 ohm
Input Level -20 to +0 dBfs
Data Format S/PDF, AES/EBU, IEC958, EIAJCP340/1201
Sampling Frequency from 32 to 96 KHz
SCA, RDS, AUX OPERATION
Input Impedance ≥ 2 Kohm
Input Level -6 to +12 dBm
Frequency Response ±0.1 dB, 50 KHz to 100 KHz
Input Connector BNC female
AUXILIARY CONNECTIONS
RS485 DB9 connector back panel
Telemetry Interface connector DB25 back panel
LAN RJ45 connector back panel
MPX OUT connector BNC back panel
OPTIONS
AES/EBU -SPDIF
RDS/RBDS Programmable Coder via PC
OIRT or JPN version
SNMP
Audio IP
[/tab]
[/tabs]