EuroCaster DS2000 FM Transmitter 2KW, stereo


EuroCaster

3U, Highest efficiency, web-server, LCD touch panel, superb audio, many options

[tabs style=”style1″]
[tab title=”IN DETAILS”]

EuroCaster DS2000 FM Stereo Transmitter is the best choice of all!

Transmitter with IP remote control included. This quality transmitter has a lot of features you wont find on any other FM transmitters. For low power consumption during night time you can program the TX power to lower during a certain periode, and much more…

Main Features of the EuroCaster DS2000:

• Highest efficiency
• Nominal rf power 2000W
• Very low signal noise typ. -80 dB
• High stereo performance typ. 60 dB
• Extremely low distortion 0,01%
• Completely broadband
• 6th ld-mos generation VsWr 65:1
• large lCd color display with touch panel
• AC mains 90-260 VAC extend range with pfC
• CCir & fCC compliant
• remote Control through mobile App
• Web server
Features and specifications subject to change without notice
www.eurocaster.eu

OPtiOnS
• AEs/EBU
• rds/rBds coder
• sNmp remote control
• oirT and JpN version
• Audio ip
• digital device

[/tab]
[tab title=”FURTHER DETAILS”]

GENERAL

Power Output 2000W adjustable from front panel

RF Output Impedance 50 ohm

RF Output Connector “7/8”

Monitor RF BNC connector

VSWR 1,5:1 WITH AUTOMATIC FOLDBACK

Frequency Range 87.5 ÷ 108.00 MHz, on request 66 ÷ 74 MHz ( OIRT) 76 ÷ 90 MHz (JPN) Programmable in 1 Hz steps

Frequency Stability ±1 ppm from -5 to 45°C

External Reference 10 MHz BNC connector back panel

Type of Modulation Analog

Off Lock Attenuation ≥ -80 dBc

Modulation Capability ±150 KHz

Limiter built in

Power Good Detector adjustable from 20÷90% of the power

Audio Presence Detector adjustable time from front panel

External AGC Automatic, with fine ADJ back panel

Modulation Mode Mono, Stereo, Multiplex, SCA, RDS, Aux

Preemphasis Flat/50/75μs selectable from front panel

Asynchronous AM S/N Ratio -70 dB

Synchronous AM S/N Ratio -65 dB

RF Harmonics Exceeds EBU/CCIR/FCC requirements

RF Spurious Exceeds EBU/CCIR/FCC requirements
[/tab]

[tab title=”OVERVIEW”]

MONO OPERATION

Audio Input Impedance 600 ohm – 10 Kohm balanced

Audio Input Level -12 to +12 dBm

Input Connector XLR female

Audio Frequency Response ±0.1 dB, 20 Hz to15 KHz

Total Harmonic Distortion + Noise 0.01% @ 400 Hz

Intermodulation Distortion 0.01%, 1 KHz/1.3 KHz, 1:1 ratio

Transient Intermodulation Distortion 0.01% 2.96KHz square wave and 14 KHz sine wave

Distortion 0.01% 2.96KHz square wave and 14 KHz sine wave

FM S/N Ratio -80 dB below ±75 KHz dev.

STEREO OPERATION

Audio Input Impedance 600 ohm – 10 Kohm balanced

Audio Input Level -12 to +12 dBm

Input Connector XLR female

Audio Frequency Response ±0.1 dB, 20 Hz to 15 KHz

Total Harmonic Distortion + Noise 0.01% @ 400 Hz

Intermodulation Distortion 0.01%, 1 KHz/1.3 KHz, 1:1 ratio

Transient Intermodulation Distortion 0.01% 2.96KHz square wave and 14 KHz sine wave

FM S/N Ratio -80 dB below ±75 KHz dev.

Stereo Separation 20 Hz ÷ 15 KHz ≥ -60dB

Crosstalk attenuation Main to Sub -70 dB 30 Hz to 15 KHz

38 KHz Suppression ≥-85 dB

Pilot Frequency 19 KHz ± 1 Hz

Output Pilot 1 Vpp., BNC female
[/tab]
[/tabs]

Category:
× Send Us A Whatsapp Message