Beyer DT 290_200/80

Closed headset with dynamik microphone
Headset, 200/80 ohms, black, with bare-ended K 190.00 straight cable, 1.5 m
Closed headphone
Neodymium magnet system for accurate reproduction
Soft, circumaural ear pads
Very good ambient noise attenuation
Single-sided, plug-in type connecting cable.

The DT 290 is a stylish, lightweight, closed headset that features excellent ambient noise isolation and a gooseneck mounted high quality dynamic microphone.
The headset series is designed for continuous use in a variety of applications including intercom, talkback and camera communications systems as well as on-air use where a dynamic microphone is required.

Transducer type Dynamic
Operating principle Closed
Frequency response 10 – 30,000 Hz
Nominal impedance 80 ¥Ø
Nominal SPL at 1 kHz 100 dB
T.H.D. < 0.2%
Power handling capacity 100 mW
Ambient noise isolation 16 dB (A)
Sound coupling to the ear Circumaural
Average pressure on ears 4.5 N
Weight without cable 240 g
Cable length 1.5 m

Headset/-Mikrofon
Transducer type Dynamic
Frequency response 40 – 12,000 Hz
Polar pattern Hypercardioid
Output voltage approx. 3 mV at a distance of 5 cm
Nominal impedance 200 Ohm.
Load impedance st©ªrre end 1000 Ohm.

Varianter:

DT 290_200/250 (Order : 443.646)

Headset, 200/250 ohms, black, with dynamic microphone, with bare-ended K 190.00 straight cable, 1.5 m

DT 290 V.11_200/80 (Order : 442.925)
Headset, 200/80 ohms, black, with dynamic microphone, with built-in pre-amp for phantom supply, with bare-ended K 190.00 straight cable, 1.5 m.