Axel Oxygen 3000D Digital Broadcast Mixer


Axel Tech Oxygen 3000D

Oxygen 3000 digital broadcast console with 10 faders. IN: 5 mic (+48V), 6 analog stereo, 1 digital, 1 aux, 2 USB-audio, Bluetooth. OUT: 8 analog, 1 digital, 2 USB-audio. 1 Telephone / 1 Telco. 5-band equalizer. Compressor. GPIO for fader start and OnAir Lamp.
The number 1 of the category, the best quality/price ratio

Axel Tech Oxygen 3000 is the new concept digital console and defines a new standard in the broadcast market. Characterized by an elegant design and compact size, Axel Tech Oxygen 3000 has been designed for both On Air and Production studios. Axel Tech Oxygen 3000 is based on digital technology with DSP audio processing to deliver high-end quality, latest features and flexibility with ease of use. Axel Tech Oxygen 3000 is the number 1 of the category at the best quality/price ratio. Axel Tech Oxygen 3000 is a powerful and compact unit featuring 10 faders, meters for each single channel, built-in 7” display for settings, wide range of connectivity and accessories in a rugged and classy steel chassis. Easy and reliable as the analogue mixing consoles, Axel Tech Oxygen 3000 adds the value of the digital engine that grants a near 0 latency ( < 0,7 ms I/O ) and plenty of advanced functions as the internal routing signal, customizable preset and easy recall, user defined smart keys, analog and digital I/O.

 

NEW ! Oxygen 3000 Dante (2 In + 2 Out)
New Firmware 3.3.0.5 with:
0-12 AM/PM Clock
HDMI Output
Timers on Mic Inputs

 

Highlights
General

Fully digital broadcast mixing console
Near 0 latency ( < 0,7 ms I/O)
Signals routing
10-fader console
4+1 busses (PGM, SUB, Aux1, Aux2, PFL)
User-definable Snapshot
5 band fully parametric EQ
Dyn Processor on microphone inputs
Webpage
Customizable RGB colored buttons
7” Graphic Color Display
Ctrl-Room and Studio Facilities
A/B Fast source switch buttons
10 led meter bars for input source monitoring
High Resolution led meter bars for outputs (164 leds)
HDMI Out – Full HD connection for mixer monitor
2 Timers (Ctrl-Room and Studio microphones timers on HDMI Monitor)
TalkBox for guest and presenter*
Built-in media player*
Redundant PSU*

Input Output

5 microphones inputs
8 stereo inputs
7 stereo outputs
1 built-in telephone hybrid,
1+4 telco interface with GPIO
Bluetooth audio interface
1 digital In/Out (AES EBU)
2 USB audio interface

Inputs & Outputs
Microphone Inputs – Oxygen 3000 allows connection of XLR and RJ45 connector:

Inputs replicated from XLR to RJ45: 2-3-4-5, balanced with + 48V Phantom and GPIO
Telco: Microphone No. 5 mutually exclusiveSupported Video Cards: Blackmagic Design
DeckLink and Intensity, AJA Corvid, Bluefish

Digital input line:

Digital Input: 1 AESEBU Input on XLR

Analogue Outputs:

Line Outputs: 6
Balanced outputs: 4 Line out on XLR – PGM, SUB, AUX-1, AUX-2
Unbalanced outputs: 2 Line out on RCA – REC-1, REC-2

Headphones and local monitor outputs:

Balanced outputs: 2 line out on RJ45 for Studio Presenter and Studio Guest Headphones
Unbalanced outputs: 2 Line out on RCA for Control Room and Studio Speaker
Unbalanced outputs: 2 Line out on Jack 6.3 for Control Room and Studio Headphones

Analogue inputs lines:

Line Inputs: 8
Balanced inputs: 3 Line In on XLR
Unbalanced Inputs: 4 Line on RCA
Aux Input: 1 Line In Jack 3.5mm

Telephone hybrid and Telco:

Telephone Hybrid: 1 POTS/PSTN telephone line with Line.In and Tel.Set connection
Telco: 1 in/out N-1 to connect external telephone hybrid with control via TLC/GPIO
4 inputs/outputs N-1 on inputs STEREO 4/5 and outputs REC 1/2 .

Digital output:

Digital Output: 1 AESEBU output on XLR

GPI/GPO:

GPI: 12 in total, for Talk back, Telephone Hybrid or other features.
GPO: 10 total, to control OnAir lamps or Telephone Hybrid.

Details

USB audio interface

The USB audio interface allows to directly connect the PC to the Oxygen 3000 console, with no need for audio cards: infact the PC detects the console as a digital audio card with 2 stereo inputs and 2 stereo outputs for simultaneous playout and recording.

 

Telephone Hybrid and Telco

The built-in telephone hybrid allows direct connection of a telephone line POTS/PSTN on RJ-11C. The audio is processed via DSP that delivers a state-of-the-art audio processing. It’s also available a Telco N-1 in/out, to connect Oxygen 3000 to an external telephone hybrid. The output Telco N-1 is always available on XLR male, while the input receiving line is mutually shared with Mic-5. TLC commands are available on SubD connector with Hook and Ring interface for external telephone hybrid.4 inputs/outputs N-1 on inputs STEREO 4/5 and outputs REC 1/2 are also available without GPIO controls.

 

Bluetooth

Oxygen 3000 has a Bluetooth audio connection, this feature allows airing the phone calls via Skype, Viber, Whatsapp or a normal phone calls by a Smartphone and Tablet.Oxygen 3000 has two modes of audio connection, one bidirectional to support phone calls and a second one for streaming high quality stereo audio (A2DP), this last feature allows airing the music from smartphones and tablets.

 

GPIO

The console Oxygen 3000 has 12 GPI and 10 GPO, which allow connections to OnAir signal lamps according the opening of a microphone channel, or provide HOOK and RING commands for external telephone Hybrid.
Features details
Display 7″

The OXYGEN 3000 has a 7 ” colour graphic display for displaying all the airing parameters and for configuring all the device feature.

The large display combined with the 4 rotary knobs allow the fast and intuitive programming of all the mixer parameters. actually, Oxygen 3000 have a very easy and intuitive programming interface has been specially designed.
HDMI output

The HDMI output in OXYGEN 3000 is offer the possibility to connect a display monitor FullHD at the console. This feature providing multiple information on settings and operating levels. List of HDMI output display components.

audio input source leavle.
4+1 BUS output leavle.
A/B sources assigned of 10 channels.
display ON-Air sources.
Microphone On timer (control room & studio)
Large Clock
audio output level (Loudspeakers & Headphones)
OnAir microphone.
Telephone active.

 

The HDMI interface also offers the possibility for radio stations to upload their own logo on the graphic interface.
Power supply

Universal Power on IEC Schuko cord, thanks to the universal power supply switching with working voltage between 90Vac and 264Vac and frequency between 50-60Hz. The PSU is able to adapt itself to the operating voltage of any country in the world. It’s also available redundant power supply (optional).
Talk Box

It is Console dedicated to the presenter or guests, it is possible to connect maximum up to 4 units.This TalkBox is very simple to connect to the console, actually its take 2 RJ45 cables of the length that needed to connect it to the mixer.The TalkBox offer a direct connection of the microphone and relative On-Air light, it is also possible to directly connect the studio’s On-Air Light. The Talk Box has a headphone amplifier with two 6.3mm outputs.Through the two large backlit buttons it is possible to activate and deactivate your own microphone (On / Off / Cough) or enable Talk back to the console.
Technical Specifications

Analog Balanced Stereo Inputs
Connector: XLR Balanced – EMI Suppressed
Input Impedance: 10Kohm
Nominal Input Level (sensitivity): 0dBu
Max Input Level (clipping point): +18,5dBu
A/D conversion: 24 bit / 48 Khz
Frequency response: +/-0,5dB from 20Hz to 20kHz
Signal To Noise Ratio (referred to peak level): >100dB
Stereo Separation (referred to peak level): >90dB
THD+N: <0,002%

Analog Unbalanced Stereo Inputs
Connector: RCA unbalanced – EMI Suppressed
Input Impedance: 10Kohm
Nominal Input Level (sensitivity): 0dBu
Max Input Level (clipping point): +18,5dBu
A/D conversion: 24 bit / 48 Khz
Signal To Noise Ratio (referred to peak level): >90dB
Stereo Separation (referred to peak level): >80dB
THD+N: <0,05%

Analog Balanced Microphone Inputs
Connector: XLR Balanced – EMI Suppressed
Input Impedance: 2,4Kohm
Nominal Input Level (sensitivity): -21dBu
Max Input Level (clipping point): +7dBu
A/D conversion: 24 bit / 48 Khz
Signal To Noise Ratio (referred to peak level): >90dB
THD+N: <0,01%
Analog Gain: Adjustable +0 ÷ +60dB (3dB step)
Phantom Power: +48V

Analog Balanced Telco Input (shared with MIC5, mutually exclusive)
Connector: XLR Balanced – EMI Suppressed
Input Impedance: 2,4Kohm
Nominal Input Level (sensitivity): 0dBu
Max Input Level (clipping point): +18,5dBu
A/D conversion: 24 bit / 48 Khz
Signal To Noise Ratio (referred to peak level): >90dB
THD+N: <0,01%

Analog Balanced Stereo Outputs
Connector: XLR Balanced – EMI Suppressed
Output Impedance: 23ohm, nominal 600ohm
Nominal Output Level: 0dBu
Max Output Level (clipping point): +18,5dBu
D/A conversion: 24 bit / 48 Khz
Signal To Noise Ratio (referred to peak level): >100dB
Stereo Separation (referred to peak level): >90dB
THD+N: <0,002%

Analog Unbalanced Stereo Outputs
Connector: RCA Unbalanced – EMI Suppressed
Output Impedance: nominal 560ohm
Nominal Output Level: 0dBu
Max Output Level (clipping point): +19dBu
D/A conversion: 24 bit / 48 Khz
Signal To Noise Ratio (referred to peak level): >90dB
Stereo Separation (referred to peak level): >80dB
THD+N: <0,05%

Analog Balanced Talkbox Outputs
Connector: RJ45 balanced – EMI Suppressed
Output Impedance: 100ohm, nominal 600ohm
Nominal Output Level: 0dBu
Max Output Level (clipping point): +14dBu
D/A conversion: 24 bit / 48 Khz
Signal To Noise Ratio (referred to peak level): >100dB
Stereo Separation (referred to peak level): >90dB
THD+N: <0,05%

Analog Balanced Telco Output
Connector: XLR Balanced – EMI Suppressed
Output Impedance: 23ohm, nominal 600ohm
Nominal Output Level: 0dBu
Max Output Level (clipping point): +18,5dBu
D/A conversion: 24 bit / 48 Khz
Signal To Noise Ratio (referred to peak level): >100dB
THD+N: <0,002%

Digital Input
Connector: Balanced on 1 XLR – EMI Suppressed
Input Impedance: 110Ω
Standard: AES3
Audio Sample Rate: 32/44.1/48KHz with aSRC
Resolution: 24 bit
Dynamic Range (Converter Values): 124dB

Digital Output
Connector: Balanced on 1 XLR – EMI Suppressed
Input Impedance: 110Ω
Standard: AES3
Audio Sample Rate: 48KHz
Resolution: 24 bit
Dynamic Range (Converter Values): 124dB

USB Audio Digital I/O
Connector: USB Type B – EMI Suppressed
Playback And Recording Sample Rate: 48KHz fixed
Resolution: 16 bit
Channel count: 1 Stereo play, 1 stereo rec for each USB interface

PSTN Interface
Connector: RJ11
Transhybrid loss: >36dB

System
Audio Core: Analog Devices ADAU1452 32bit 294MHz fixed point DSP
Audio CODECs: Cirrus CS42448 24bit/192kHz
System Core: Allwinner A20 dual core cortex-A7 at 800MHz, 1GB RAM
System display: 7” TFT 800×480 LCD
LAN Connection: RJ45 – 100Mbit
Nominal Delay (analog input to analog output): 0,7ms
GPIO Inputs/Outputs: 12 GPI / 10 GPO
Communication Port: 2xUSB type-A, 2xUSB type-B , 1xLAN, 1xHDMI
Operating Temperature: 0°C ÷ 40°C

PSU (optionally redundant)
Power Supply: 90-260 Vac / 47-63 Hz 45W

Dimensions
Dimensions (W; H; D): 660mm; 142mm; 540mm
Weight: < 20Kg
Dimensions:

 

Category:
× Whatsapp Message